ibhentshi lathe CZ1340G-1 CZ1440G-1

Inkcazelo emfutshane:

* Indlela yesikhokelo yebhedi yokucima i-audio ye-Ultra;
* I-Spindle idityaniswe neebheringi ezichanekileyo;
* Iigiya ezingaphakathi kwintloko yentloko zaqiniswa kwaye zacolwa.
* I-Gearbox iyasebenza ngokulula.
* Imoto yomelele ngokwaneleyo;
* Impumlo ephothayo luhlobo lwekhamlock ye-ASA D4;
* Imisebenzi eyahlukeneyo yokusika imisonto ekhoyo.

Zonke iileyile zethu zebhentshi kufuneka zihambe ngeetshekhi ezintathu ezahlukeneyo kuyo yonke inkqubo yokuvelisa: ukuphoswa kwentsimbi kunye nazo zonke iintlobo zezinto ezithengiweyo kunye nezinto ezenziwe ngokwazo, indawo nganye yomatshini wokudityaniswa komatshini kunye nokuhlolwa ngokuchanekileyo kwemveliso egqityiweyo, Silawula umgangatho kwizinto ezikrwada, sihlala sikhetha ezona zixhobo zisemgangathweni okrwada, umzekelo, i-resin sand iron casting kunye neHT300 materal kunye nezinto ezidumileyo zombane zebrand, kwaye sinomhloli womgangatho wenkqubo nganye, umgangatho uhlala uphezulu wethu.samkela bonke abathengi abavela kwihlabathi liphela ngentsebenziswano.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Iimbonakalo

Ii-Acs eziqhelekileyo

*imihlathi emithathu,
* Landela ukuphumla kunye nokuphumla okuzinzileyo,
* Izikrufu,
*Umpu weoyile,
*Iziko kunye nomkhono weZiko,
*Izixhobo eziyimfuneko;
* Ukutshintsha izixhobo,

Iintshukumo ozikhethayo.

* Umatshini wokumisa,
* Isibane esisebenzayo,
*Impompo yokupholisa,
*Ukuqhawuka kweenyawo,
*Isixhobo sokutshiza,
*I-4-jaw chuck,
*Ipleyiti yobuso
*Iziko eliphilayo
*Isixhobo sokutshintsha ngokukhawuleza;
*2-Axis DRO
*Umkhuseli wechuck;
*Umkhuseli wesixhobo;
*Umkhuseli wabasebenzi abakhokelayo;

Inkcazo

INTO		CZ1340G/1	CZ1440G/1

Jingi phezu kwebhedi	mm	φ330	φ360
Jingi phezu kwekhareji	mm	φ195	φ220
Swing phezu komsantsa	mm	φ476	φ500
Ububanzi bendlela yokulala	mm	186	186
Umgama phakathi kwamaziko	mm	1000	1000
I-taper ye-spindle		MT5	MT5
Idayamitha ye-Spindle	mm	φ38/51	φ38/51
Inyathelo lesantya		8	8
Uluhlu lwesantya	rpm	70 ~ 2000 (84-1850)	70 ~ 2000 (84-1850)
Intloko		D1-4/D1-5	D1-4/D1-5
Umsonto weMetric		26 iintlobo (0.4~7mm)	26 iintlobo (0.4~7mm)
Umsonto we-intshi		34iintlobo(4~56T.PI)	34iintlobo(4~56T.PI)
Umsonto wokubumba		16 iintlobo(0.35~5M.P)	16 iintlobo(0.35~5M.P)
Umsonto wediametral		36 iintlobo(6~104D.P)	36 iintlobo(6~104D.P)
Ukutya okude	mm/r	0.052~1.392 (0.002”~0.0548”)	0.052~1.392 (0.002”~0.0548”)
Cross feeds	mm/r	0.014~0,38 (0.00055”~0.015”)	0.014~0,38 (0.00055”~0.015”)
Idayamitha yesikrufu sokukhokela	mm	φ22(7/8”)	φ22(7/8”)
I-pitch yesikrufu selothe		3mm okanye 8T.PI	3mm okanye 8T.PI
Ukuhamba ngesali	mm	1000	1000
Uhambo olunqamlezayo	mm	170	170
Uhambo oludibeneyo	mm	74	74
Uhambo lomphanda	mm	95	95
Idayamitha yomphanda	mm	φ32	φ32
Taper yeziko	mm	MT3	MT3
Amandla emoto	Kw	1.5(2HP)	1.5(2HP)
Injini yamandla enkqubo yokupholisa	Kw	0.04(0.055HP)	0.04(0.055HP)
Umatshini(L×W×H)	mm	1920×750×760	1920×750×760
Yima(ekhohlo) (L×W×H)	mm	440×410×700	440×410×700
Yima(ekunene) (L×W×H)	mm	370×410×700	370×410×700
Umatshini	Kg	500/560	505/565
Yima	Kg	70/75	70/75
Ilayisha isixa		22pcs/20'container	22pcs/20'container