UkuJika komngxuma onzulu kunye noMatshini oBoring TCS2150
Inkcazo yomsebenzi
Umatshini ufakwe kunye ne-headstock yomsebenzi kunye nentloko yokuhamba kunye ne-drilling ejikelezayo / intonga ebolileyo, zombini i-workpiece kunye nesixhobo sinokujikeleza, kunye nesixhobo sokusika sinokulungiswa, ukondla kuphela.
Ukongeza, lo matshini ukwafakelwa isixhobo esifana neso lelathe, ukuze umatshini wongeze umsebenzi wokujika isangqa sangaphandle ngesiseko sokomba onzulu kunye nomatshini wokudika.Umatshini luluhlu lweemveliso, kwaye unokubonelela ngeemveliso ezahlukeneyo ezilungisiweyo ngokweemfuno zabathengi.
Lo matshini unebhedi, isitokhwe sentloko, isibane se-chuck, ukuphumla okuvulekileyo okuvulekileyo, ukuphumla okuzinzileyo, intloko yoxinzelelo lweoyile, i-vibration damper engaguquki kwintonga ekruqulayo, intloko yokuhamba ejikelezayo yokomba / intonga edikayo, inkqubo yokupholisa, inkqubo yombane, inkqubo yehydraulic, ichip. ukususa isixhobo, inkqubo yokuthambisa, isithuba sesixhobo sokujika njl.njl.
i-chuck emine yomhlathi ifakwe kwi-headstock yomsebenzi ngelixa kubhobhoza, kwaye ngelixa idikayo, iipleyiti ezimbini ze-taper zisetyenziswa, enye ifakwe kwi-front end ye-spindle kwi-headstock yomsebenzi, enye ifakwe kwintloko yoxinzelelo lwe-oyile, i-taper plates. zikulungele kakhulu ukuzimela, kwimeko eqhelekileyo, iqondo leeplate ze-taper li-15 °, imfuno ecacileyo yeeplate ze-taper inqunywe ngubukhulu bomsebenzi.Umthengi unokukhetha enye indlela yokubamba.Kukho i-taper plate phambi kwentloko yoxinzelelo lwe-oyile (isixhobo sokubonelela nge-oyile), kwaye kukho ihlathi elikhokelayo ngaphakathi kweeplate ze-taper, ezisetyenziselwa ukukhanda isikhokelo / intloko ebolileyo, esi sihlahla sesikhokelo kufuneka sitshintshwe xa isixhobo sokusika. iza kutshintshwa.
Ipharamitha yobugcisa
| Isakhono sokuSebenza | Uluhlu lokomba Dia. | Φ40-Φ120mm |
| Max.idikayo Dia. | Φ500mm | |
| Max.ubunzulu obudikayo | 1-16m | |
| Max.ujika ngaphandle Dia. | Φ600mm | |
| I-Workpiece icinezelwe i-Dia.uluhlu | Φ100-Φ660mm | |
| I-spindle | Ubude beziko ukusuka kwiziko lokusonta ukuya ebhedini | 630mm |
| USpindle wazala uDiya. | Φ120mm | |
| Taper of spindle bore | Φ140mm, 1:20 | |
| Uluhlu lwesantya sokusonta | 16-270rpm, 12 iintlobo | |
| Intloko yokuhamba enebar ejikelezayo yokomba | USpindle wazala uDiya.yentloko yokuhamba enebar ejikelezayo yokomba | Φ100mm |
| I-taper ye-spindle bore (intloko yokuhamba ene-roring bar ejikelezayo) | Φ120mm, 1:20 | |
| Uluhlu lwesantya sokusonta (intloko yokuhamba enebar yokubhola ejikelezayo) | 82-490rpm, 6 iintlobo | |
| Ukutya | Uluhlu lwesantya sokutyisa (okungenasiphelo) | 0.5-450mm / min |
| Isantya sohambo olukhawulezayo lwekhareji | 2m/min | |
| Iimoto | Amandla enjini aphambili | 45KW |
| Amandla emoto yentloko yokuhamba enebar ejikelezayo yokomba | 30KW | |
| Amandla ombane wempompo ye-hydraulic | 1.5KW, n=1440rpm | |
| Ukuhamba ngokukhawuleza amandla emoto yenqwelo | 5.5KW | |
| Ukutya amandla emoto | 7.5KW (injini ye-servo) | |
| Amandla emoto wempompo yokupholisa | 5.5KWx3 + 7.5KWx1 (amaqela ama-4) | |
| Motor ye Z axis | 4KW | |
| Imoto ye-X axis | 23N.m (engena nyathelo) | |
| Abanye | Uxinzelelo olulinganisiweyo lwenkqubo yokupholisa | 2.5MPa |
| Ukuhamba kwenkqubo yokupholisa | 100,200,300,600L/min |